Best Of Automatic Roof De-Icing Cable Control

Easy Heat RS-2 Automatic Roof De-Icing Cable Control

Control expense and energy use in electric roof cable protection automatically with Roof Sentry (RS-2). The RS-2 requires two conditions to be present before it energizes roof deicing cable: cold temperatures (ON, 38-degree F; OFF, 48-degree F) and the presence of runoff water from the roof in contact with its sensor wire. If only one of the conditions exists, the control will not energize the cable.

Easy Heat ADKS-1000 200-Foot Roof Snow De-Icing Kit

ADKS roof and gutter de-icing cables help end costly ice damage by preventing ice dam formation and promoting the free flow of water through gutters and downspouts to ground level. This product is for the sole intended use of preventing ice dams from forming on inclined roofs with tab shingles, in gutters and in downspouts. This roof de-icing cable is not intended for use as a snow-melting system to clear roof of ice and snow. Never install on a flat roof. Never install on combustible materials. Not suitable for use on metal roofs

HeatTrak HR20-60 Residential Snow & Ice Heated Walkway Mat, 20-Inch by 5-Foot, 120 Volt

Reduce slip-and-fall accidents outside your home with HeatTrak's Heated Outdoor Walkway Mat. This electrically heated mat is designed to prevent snow and ice accumulation on walkways around the home. The mat is portable and plugs into any standard 120V outlet generating heat to melt snow at a rate of 2-inch per hour.

HeatTrak HR-P Residential Snow & Ice Heated Stair Mat Control Unit With 6-Foot Power Cord

This item is required for the Residential Safety Treads, Residential Walkway Mats, and Industrial Stair Mats. This item is not required for Industrial Walkway Mats. Every group of heated stair mats and residential walkway mats requires a GFCI (Ground Fault Circuit Interrupter) controller to connect the system to an electrical outlet.